SurfaPore M
Protects porous surfaces, marbles and granites from oil, water and stains
SurfaPore™ M is a water-based formulation, specifically designed to harness the power of nanotechnology, in order to achieve both oil and water repellency on the surfaces applied. Its action mechanism is simple in concept but effective in practice: The core nano-sized particles, suitably engineered to fit the pores of the surface applied, penetrate and “flood” pores that can accumulate water, oil or dirt.
Protects porous surfaces, marbles and granites from oil, water and stains
SurfaPore™ M is a water-based formulation, specifically designed to harness the power of nanotechnology, in order to achieve both oil and water repellency on the surfaces applied. Its action mechanism is simple in concept but effective in practice: The core nano-sized particles, suitably engineered to fit the pores of the surface applied, penetrate and “flood” pores that can accumulate water, oil or dirt.
SurfaPore™ M anchors on to the surface applied, resulting in the coating being permanent and effective. After coating, water, oil or dirt fails to penetrate into the porosity of the substrate. Therefore, an important, value-adding objective has been achieved: Permanent pore protection provides stain proofing and easy cleaning properties. The application of SurfaPore™ M does not induce any visual change on the surface applied and does not block its breathability. Also, it blocks the absorbance of UV radiation without affecting the surface. Therefore, superior protection of the substrate is achieved without discolorations (yellowish essence) or loss of effectiveness.
Ideal for oil and water protection of porous surfaces such as marbles and granites. It also prevents staining.
Applications:
- Oil & water protection of
porous surfaces (marbles and
granites) - Prevents staining of kitchen
countertops - Protects high traffic areas
Application Note
Surface Application: The application surface should be dry and clean. Apply SurfaPore M by brush, roller or spraying. No dilution is required.
After about 15 minutes, and before SurfaPore M dries completely, remove application excess with a wet, soft cloth and polish the surface. For extra protection of very sensitive surfaces reapply, within 3 hours after the first application.
Maximum efficiency is achieved 7 days post application.
Consumption: Estimated consumption rate 12-18 m2 per litre, strongly dependant on the absorption properties of the
application surface.
- Very effective & Nano-based.
- High breathability.
- Non-film forming – Invisible.
- Long-lasting & UV-resistant.
- Easy to apply.
- Water-based.
- Environmentally friendly.
- Cost-effective
