SurfaPore C

Breathable, waterproof coating for lime plasters and renders utilising the latest Nanotechnology, that causes practically no change to the original natural appearance.

SurfaPore C is a water based, liquid formulation, developed and produced by NanoPhos SA, that provides effective waterproofing and protection of a wide range of building surfaces. As its viscosity is similar to that of water, it deeply penetrates into capilaries that no elastomer or polymer can reach. It is applied by roller, brush or spraying. The nanotechnology based composition assures effectiveness, prolonged lifetime and minimal (practically zero) change to the original natural appearance, but at the same time it is really cost effective.

Why is “breathability” so important?

Whilst SurfaPore C creates a water barrier on the material itself, one of the most important advantages of SurfaPore C is the “breathability” of the modified surface. In case moisture is trapped or a water leakage takes place behind a SurfaPore C modified surface, water can evaporate through the open pores to the environment relieving negative capillary pressure. In this manner swelling, cracking, and warping of material are prevented. All in all, SurfaPore modified surfaces remain dry and unchanged in both appearance and mechanical properties.