EcoCORK Insulating Plaster
The EcoCork Lime Render supplied by Ty-Mawr is a lightweight render, formulated with natural cork aggregates, Natural Hydraulic Lime, lime aggregates and additions.
This product is part of a system, to see the complete system please follow the link below.
The ecoCORK Lime Render/Plaster supplied by Ty-Mawr is a lightweight render, formulated with natural cork aggregates, Natural Hydraulic Lime, plus additions to improve workability and aid spray application.
The inclusion of cork and Natural Hydraulic Lime in the formula, brings a product to market that reaches new heights in sustainable building whilst maintaining high ecological values. This plaster/render contributes to the improvement of the thermal and acoustic insulation values of the construction elements to which it is applied.
Recommended in the execution of lightweight renders on walls and ceilings, in interiors and exteriors, where it is intended to increase the thermal and acoustic performance of the substrates. This render is part of an acoustic and thermal double layer solution, which corresponds to the filling layer.
Secil ecoCORK Lime must be applied over a rough cast, similar to Reabilita Cal Consolidação, on ceramic brick, cement block, concrete and stone masonry substrates. However, on some of these substrates, special caution measures on adhesion conditions must be taken into consideration (see Technical Sheet for full details of Application, Characteristics and Restrictions).
Suitable For
- Internal Base Coat Plaster
- Masonry
- External Bade Coat Render
- Masonry
Coverage Rate
- 1sqm at 20mm per 14kg Bag
- 2sqm at 10mm per 14kg Bag
- Excellent environmental credentials.
- High durability (outstanding behaviour during freeze/thaw cycles)
- High durablilty, with excellent credentials for extreme environments.
- Formulated exclusively with Natural Hydraulic Lime.
- Incorporates natural and renewable cork aggregates.
- Exceptional permeability to water vapour.
- Improves thermal performance of a building.
- Improves the dynamic behaviour of the constructive solutions, with an excellent capacity of energy storage or thermal delay.
- Improves acoustic insulation, contributing to reduction of aerial sounds by up to 7db.
- It is a light material (a reduction of around 50% in bulk density for every m3, in comparison with other traditional lime mortars)
- Reduction of CO2 emissions in transport (up to 50% of the emissions in comparison to traditional renders).
- Reduction of 70% in volume in the consumption of natural but non-renewable aggregates.
- Absorbs CO2 throughout cabonation, offsetting the carbonfootprint of it's production.
- Incorporates natural and renewable cork aggregates.
- Exceptional permeability to water vapour.
- Improves thermal performance of a building (Lambda (k) value is 0.1 W/m.k.).
- Improves the dynamic behaviour of the constructive solutions, with an excellent capacity of energy storage or thermal delay.
- Improves acoustic insulation, contributing to reduction of aerial sounds by up to 7db.
- It is a light material (a reduction of around 50% in bulk density for every m3, in comparison with other traditional lime mortars)
- Reduction of CO2 emissions in transport (up to 50% of the emissions in comparison to traditional renders).
- Reduction of 70% in volume in the consumption of natural but non-renewable aggregates.
- Absorbs CO2 through carbonation of the lime, offsetting the carbon footprint of its production.
14kg Bag
Customer Questions
Related Products
Reabilita Cal CS (Consolidation)
Render Mesh
