Reabilita Cal AC (Finishing)

More Views

Reabilita Cal AC (Finishing)

Availability: In stock

This is a breathable rendering mortar, formulated with natural hydraulic lime, mixed with carefully selected aggregates, used as a finish coating in the renovation and rehabilitation of exteriors on old masonry.
Every effort has been made to ensure the accuracy of the colour and texture of products on this website but due to the limitations of technology, we strongly recommend that sample products are purchased for testing in situ prior to the full order being placed.

REABILITA CAL AC (Finishing) Render/Plaster - 25kg bag - (per bag 7m2 at 3mm)

£18.51 (Excl. VAT)
Description

Details

This is a breathable rendering mortar, formulated with natural hydraulic lime, mixed with carefully selected aggregates, used as a finish coating in the renovation and rehabilitation of exteriors on old masonry.

This Natural Hydraulic Lime based NHL Finishing Mortar is a dry mortar, formulated with natural hydraulic lime, for the finish coating in a fine breathable layer, in the renovation and rehabilitation in exteriors on old masonry.

Its tixotropy, adhesion and permeability properties are particularly adapted for the use over old rendered substrates.

Technical Documents
View FileReabilita Cal Acabmento - Technical Sheet    Size: (1.36 MB)
Application Advice

Preparing the substrates

The subtrates must be clean of dust, sand, release agents, disaggregated or unstable 
materials or paints. It is recommended, on old subtrates, to wash surfaces with pressurized water or brushing with a wire brush. 

Preparing the mortar

The NHL Finishing Mortar must be mixed with the appopriate amount of water, in small quantities and using an electrical drill, in order to obtain a uniform paste without lumps. 

Application

After mixing the NHL Finishing Mortar, a smooth layer must be applied over the substrate. One or two layers of this mortar are enough to give the surface a smooth texture with a natural colour. 

In the application process, the necessary cautions must be ensured, using the adequate techniques, in order to guarantee a continuous and uniform appearance, eliminating creases or other imperfections. 

The total tickness of the coating should not be above 4 mm. 

Additional Advice

The NHL Finishing Mortar must not be applied at temperatures below 5 ºC and above 30 ºC. In dry weather or under exposure to strong winds, proceed with the watering of the executed surfaces for a week, in order to keep the mortar permanently moistened.

Reviews