External Wall Insulation - Design – Schneider Woodfibre Boards

500mm – 600mm Solid Wall

Option 1 (Woodfibre)

For different thicknesses/insulation values please contact our technical advisors.

Approx 15mm levelling coat of Hydraulic Lime Plaster*

Adhesive 10mm combed coat

Woodfibre boards 120mm fixed with insulated fixings at a typical fixing rate of 8 per m2

Board manufacturers proprietary render system following manufacturer’s instructions

1 x 10mm Base Coat SecilTek Isovit (meshed) & 1 x 3mm Top Coat SecilTek Cal AC

Vapour permeable paint finish - Silicate masonry paint, Tŷ-Mawr limewash

*as specified by Tŷ-Mawr Ltd. Please note different insulation thicknesses are available if there is not a Building Regulations requirement

Table shows typical thicknesses suitable for external wall insulation, but please contact us for a specific u-value calculation, condensation risk analysis and quotation for your project.