sustainable building materials for healthier homes

Quantity calculator for Lime Mortar

To start a new calculation, please click here at any stage.

Mortars can be seen in a wide range of strengths, colours and compositions across the country. It is important to choose the correct strength of mortar for your situation, please see your specification or refer to our catalogue, website or data sheets. If you are matching an old mortar then it is also important to choose a similar colour/texture. It is the aggregate/sand that predominantly effects the colour and texture and this obviously varies from region to region. Should you wish to send us a sample, we can also help to advise on a compatible mix. Call our technical advisers on 01874 611350 if you have any queries.

What's this?

What's this?

What's this?

What's this?

Cotswold
Dark Blaenavon
London
Cumbrian
Cheshire
Shale
Blaenavon
Old Red Sandstone Fine
Old Red Sandstone Coarse

Cotswold
Dark Blaenavon
London
Cumbrian
Cheshire
Shale
Blaenavon
Old Red Sandstone Fine
Coarse Brown
Coarse Pink
Fine Brown
Old Red Sandstone Coarse

What's this?

What's this?

TF004
TF011
TF020
TF021
TF024
TF070
TF078
TF082

Yes NoWhat's this?

Disclaimer : These product calculators are intended to provide an indication of the likely product quantities required based on our average, published coverage rates – trialled and tested over 20 years.

Please note that actual results can vary significantly as application on-site as well as the even-ness and absorption of background can all have an impact e.g. a plaster applied at 7mm instead of 9mm over an area will give different actual results and so you will have material left over, as will an application at 10mm instead of 9mm in which case you will not have enough material - so accuracy and consistency of application is an important factor in determining the amount finally used.

Therefore, we cannot accept any responsibility for any surplus material (or not enough material) being ordered, the client is advised to purchase a sample or small quantity of the product/s before placing the order so that they are able to determine the actual final quantities to order based on what they achieve on site.

It is not intended as a specification tool - we have provided tips and options where possible but specification clauses and technical sheets should be consulted, it is not possible to exhaust all possibilities and options within the limitations of these calculators.

If you have any queries, please contact our Sales team on 01874 611350. Otherwise, thank you for using our calculators, we hope that you find them useful and we very much look forward to receiving your order and working with you on your project. Our team of Product Advisers are here to ensure your project is a success!