St Astier Plaster/Render Products

More Views

St Astier Plaster/Render Products

Availability: In stock

St Astier has a range of render/plaster products including:



  • Thermocromex - external, one-coat, through-coloured render


Estimate how much you will need by using our calculator!

Every effort has been made to ensure the accuracy of the colour and texture of products on this website but due to the limitations of technology, we strongly recommend that sample products are purchased for testing in situ prior to the full order being placed.

St.Astier Thermocromex (25kg bags) - 1.4m2 at 10mm per bag - TF - Colour 020

£15.75 (Excl. VAT)
Description

Details

Thermocromex: An external, one-coat, through coloured render based on Natural Hydraulic Lime. Excellent waterpoofing, low capillarity, high breathability, elasticity and vibrant coloured finishes. Can be supplied to a custom colour with substantial savings in cost of painting and maintenance. Equivalent strength to that of an NHL5 but with better breathability and flexibility. Suitable for: Lightweight cement insulation blocks, clay blocks, brick and stone. Approximate Coverage: 1.7sqm at 10mm per 30kg bag.

 

Colours: Below are some of the colours available for the following St. Astier ready mixed mortars: ECOMORTAR, and THERMOCROMEX. This range of colours is by no means exhaustive. Custom Colours can be Made to Order. To obtain a colour swatch of any of the colours below, please contact us on 01874 611350. Visual appearance might vary with the granulometry of the mortar and the finish applied. The test panel will assure that the required final effect is achieved.

Please note: For Premixed Colours, a minimum of order of 42 x 25kg bags is required. Please allow a 3 week lead time for delivery. Smaller orders are supplied with a colour pack which can be mixed on site.

Technical Documents
View FileSt Astier Plaster/Render - Monostastier tech sheet    Size: (552.17 KB)
View FileSt Astier Plaster/Render - Intercromex tech sheet    Size: (1.4 MB)
View FileSt Astier Plaster/Render - Thermocromex Tech Sheet    Size: (2.28 MB)
Application Advice

Intercromex application recommendations:

Preparation: add 4.5 to 5 litres of clean water per bag. Mix Between 3 and 5 minutes maximum. 

Protection and curing: do not apply in temperatures below 5oC and above 30oC. Dampen the background to control suction prior to application. Protect against drying wind, rain and strong sun. If necessary cure with light water mist for 2-3 days. Wait 7 days before applying a finishing coat.

If required, Intercromex can be floated to a finish and painted when dry. 

It is recommended that Intercromex is cast on or sprayed on. For work on metal lath apply Intercromex as a first coat of minimum 10mm (15mm max.). 

On precast cement blocks make sure that de-moulding oils are eliminated (if necessary by sanding or high pressure water jet). 

Monstastier application recommendations:

On properly prepared background offering adequate keying, cast on or spray on a minimum of 10 mm in one pass for floated finishes or a minimum of 15 mm if a scratched finish is required. 

On waterproofed or smooth backgrounds spray or cast on a 1st bonding coat of about 3 mm adding 500 grams of SBR per bag of product. 

Straighten the work immediately after with an appropriate tool. Float (sponge, wooden or plastic) after 2-3 hours or more depending on weather conditions. 

Not suitable for light weight, porous cement blocks. 

Do not work in temperatures below 5oC or above 30oC. Protect fresh mortar from rain, frost or strong drying wind. In hot weather, dampen the background adequately and cure the work by applying a light water mist several times for a period of 72 hours. 

When Monostastier is applied as a finishing coat on a existing backing coat, the maximum thickness for floated finishes is 5-6mm or 6-8mm for scratched finishes.

Thermocromex application recommendations:

Mortar preparation: add between 5.5 and 6 (max) litres of clean water par bag of 30 kg.Mix for maximum 10 minutes.

On properly prepared background offering adequate keying, cast on or spray on a minimum of 10 mm in one pass for floated finishes or a minimum of 15 mm if a scratched finish is required. On waterproofed or smooth backgrounds spray or cast on a 1st bonding coat of about 3 mm adding 500 grams of SBR per bag of product. Straighten the work immediately after with an appropriate tool. Float (sponge, wooden or plastic) after 2-3 hours or more depending on weather conditions. 

Do not work in temperatures below 5oC or above 30oC. Protect fresh mortar from rain, frost or strong drying wind. In hot weather, dampen the background adequately and cure the work by applying a light water mist several times for a period of 72 hours.

When Thermocromex is applied as a finishing coat on an existing backing coat, the maximum thickness for floated finishes is 5-6mm or 6-8mm for scratched finishes.

Reviews